Projects
A growing collection of my projects.
2D Mohr's Circle
Mohr's Circle is a valuable tool in material mechanics that visualizes stress components in a material subjected to loads.
Von Kármán vortex
The fluid flow over cylinder was observed at different Reynolds number ranging from 5 to 3.5e6. The effect of Reynolds number was analyzed to observe the behavior of von karman street over differen...
Buoyancy Assisted Trash Cleaner
Buoyancy Assisted Trash Cleaner (BAT) was designed to be pedalled like a bicycle on stagnant water bodies such as lakes to collect floating debris and weeds.
Carburetor
The simulation of carburetor was performed to visualize the fluid flow in the perforated tube.
Cyclone Separator
The Cyclone Separator was modelled and then the mixture of fluid and particles was simulated using ANSYS Fluent to observe the flow behavior in the designed model.
Heat Exchanger
The CFD simulation was performed to observe the temperature, presssure and velocity at different location in the heat exchanger.
Munal M-72
Munal M-72 is a fixed-wing RC plane developed as the final year project to meet requirements for the degree of Bachelor of Mechanical Engineering at Pulchowk Campus, Institute of Engineering, Tribh...
Engine Block
The simulation of engine block was carried out to observe variation in structural and thermal parameters after external loading.
Spindle
Spindle was modelled and simulated to observe the structural behavior under external loads.
Wheel Rim
Different structural parameters like deformation, stress and strain was observed during the structural simulation of the wheel rim.
Jansen's Linkage
The work was intended to mimic the walking motion of the animal. This project was submitted as a partial fulfillment for Theory of Machines class.
Impeller Vane
This project was submitted as a partial fulfillment for Turbomachinery class. The project was intended to provide the basic knowledge of the radial vane impeller.
Crankshaft
The crankshaft was simulated to observe the structural behavior under external loading.
The FireFighter
The FireFighter was an autonomous prototype robot that could sense fire/flames and navigate to the site of fire and automatically extinguish the flame by pumping water from the on-board water tank....